12V 1 Channel 433MHz Wireless Remote Control Switch with 1 Transmitter
Ideal for switching AC and DC circuits. Perfect for controlling indoor or outdoor lighting, entrance access, doors, gates, motors, windows, pumps, alarm systems and lots more... Extremely easy to install and use.
Range is about 20m with the wire antenna on the receiver.
Transmitter has 2x replaceable CR2016 3V coin cell batteries. Remote comes with batteries already fitted in transmitter.
Relay Switching Mode:
* Latching Toggle ON/OFF (press ON to turn relay on and OFF to turn relay off)
Learning and Remove Method:
To Add Remotes: Press the learning code button. The indicator with go from on to off, remove your finger, press any button of the remote control, the indicator will flash 2 times and off. This means your receiver has learnt the code successfully
Receiver can learn 20x 2262 or 1527 chip remotes with different code wireless remote controllers.
To Remove/Clear All Remotes: Press the learning button for about 8 seconds, the indicator turn on to off, it means the information that you saved have been removed successfully
Receiver Specifications:
* Working voltage: DC12V
* Receiver sensitivity: -97dBm
* Working frequency: 433MHz
* Maximum Remotes Programmed: 20
* Max load current: 10A
Transmitter Specifications:
* Voltage: 2x CR2016 3V coin cell batteries (included)
* Frequency: 433MHz
* Code Type: Fixed code / Learning code
Package:
1x Receiver/relay Box with Plastic Box
1x 1-button Transmitter (comes with batteries included)
Ideal for switching AC and DC circuits. Perfect for controlling indoor or outdoor lighting, entrance access, doors, gates, motors, windows, pumps, alarm systems and lots more... Extremely easy to install and use.
Range is about 20m with the wire antenna on the receiver.
Transmitter has 2x replaceable CR2016 3V coin cell batteries. Remote comes with batteries already fitted in transmitter.
Relay Switching Mode:
* Latching Toggle ON/OFF (press ON to turn relay on and OFF to turn relay off)
Learning and Remove Method:
To Add Remotes: Press the learning code button. The indicator with go from on to off, remove your finger, press any button of the remote control, the indicator will flash 2 times and off. This means your receiver has learnt the code successfully
Receiver can learn 20x 2262 or 1527 chip remotes with different code wireless remote controllers.
To Remove/Clear All Remotes: Press the learning button for about 8 seconds, the indicator turn on to off, it means the information that you saved have been removed successfully
Receiver Specifications:
* Working voltage: DC12V
* Receiver sensitivity: -97dBm
* Working frequency: 433MHz
* Maximum Remotes Programmed: 20
* Max load current: 10A
Transmitter Specifications:
* Voltage: 2x CR2016 3V coin cell batteries (included)
* Frequency: 433MHz
* Code Type: Fixed code / Learning code
Package:
1x Receiver/relay Box with Plastic Box
1x 1-button Transmitter (comes with batteries included)