12V 1 Channel 433Mhz Wireless Remote Control Switch with 2 Transmitters
** NEW REDESIGNED MODEL **
Ideal for switching AC and DC circuits. Perfect for controlling indoor or outdoor lighting, entrance access, doors, gates, motors, windows, pumps, alarm systems and lots more... Extremely easy to install and use.
Transmitter has 1x replaceable CR2032 3V coin cell battery. Remote comes with battery already fitted in transmitter.
3 Relay Switching Modes:
* Self-lock
* Toggle
* Inter-lock
Learning and Remove Method:
1. Press the learning code button. The indicator with go from on to off, remove your finger, press any button of the remote control, the indicator will flash 2 times and off. This means your receiver has learnt the code successfully
2. Receiver can learn more than 12x 2262 or 1527 chip remotes with different code wireless remote control
3. Remove/Clear: Press the learning button for about 8 seconds, the indicator turn on to off, it means the information that you saved have been removed successfully
Receiver Specifications:
* Working voltage: DC12V
* Receiver sensitivity: -100dBm
* Working frequency: 433MHz
* Max load current: 10A
* Dimensions: 63 x 32 x 20mm
Transmitter Specifications:
* Voltage: CR2032 3V coin cell battery (included)
* Frequency: 433MHz
* Operating Current: 13 mAh
* Code Type: Fixed code / Learning code
* Dimensions: 97 x 32 x 8mm
Package:
1x Receiver/relay Box
2x 2-button Transmitter (comes with battery included)
** NEW REDESIGNED MODEL **
Ideal for switching AC and DC circuits. Perfect for controlling indoor or outdoor lighting, entrance access, doors, gates, motors, windows, pumps, alarm systems and lots more... Extremely easy to install and use.
Transmitter has 1x replaceable CR2032 3V coin cell battery. Remote comes with battery already fitted in transmitter.
3 Relay Switching Modes:
* Self-lock
* Toggle
* Inter-lock
Learning and Remove Method:
1. Press the learning code button. The indicator with go from on to off, remove your finger, press any button of the remote control, the indicator will flash 2 times and off. This means your receiver has learnt the code successfully
2. Receiver can learn more than 12x 2262 or 1527 chip remotes with different code wireless remote control
3. Remove/Clear: Press the learning button for about 8 seconds, the indicator turn on to off, it means the information that you saved have been removed successfully
Receiver Specifications:
* Working voltage: DC12V
* Receiver sensitivity: -100dBm
* Working frequency: 433MHz
* Max load current: 10A
* Dimensions: 63 x 32 x 20mm
Transmitter Specifications:
* Voltage: CR2032 3V coin cell battery (included)
* Frequency: 433MHz
* Operating Current: 13 mAh
* Code Type: Fixed code / Learning code
* Dimensions: 97 x 32 x 8mm
Package:
1x Receiver/relay Box
2x 2-button Transmitter (comes with battery included)