12V 4 Channel 433Mhz Wireless Remote Control Switch with 2 Transmitters
Ideal for switching AC and DC circuits. Perfect for controlling indoor or outdoor lighting, entrance access, doors, gates, motors, windows, pumps, alarm systems and lots more... Extremely easy to install and use.
Range is about 20m with the wire antenna on the receiver.
Each unit comes with an instruction leaflet.
3 Relay Switching Modes:
1x Receiver/relay Box
2x 4-button Transmitters (both come with batteries included)
Ideal for switching AC and DC circuits. Perfect for controlling indoor or outdoor lighting, entrance access, doors, gates, motors, windows, pumps, alarm systems and lots more... Extremely easy to install and use.
Range is about 20m with the wire antenna on the receiver.
Each unit comes with an instruction leaflet.
3 Relay Switching Modes:
- Self-lock: connect jumper to JP1. (On remote press one button for once for ON, press the same button again for OFF)
- Toggle: jumper is not fitted and JP1 and JP2 do not connected. (On remote press one button is ON, release the same button to switch OFF)
- Inter-lock: connect jumper on JP2. (On remote press one button for ON, press another button for OFF)
- Working voltage: DC12V
- Standby current: Less than 6mA
- Operating Current: 8 mAh
- Current with all relays on: 184mA (approx 44mA per relay)
- Working temperature: -40°c+80°c
- Receiver sensitivity: more than -105dBm
- Working frequency: 433mhz
- Output voltage: DC or AC
- Output current: Less than 3A
- Max load current: 10A
- Dimensions: 72 x 52 x 26mm
- Operating Voltage: DC 12V
- Frequency: 433mhz
- Code Type: Fixed code / Learning code
- Dimensions: 58 x 39 x 14mm
1x Receiver/relay Box
2x 4-button Transmitters (both come with batteries included)